| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Resistance to overvoltage and surges |
| Niepce FV   Niepce FV |
| -20 °C to +35°C |
| 1700 to 4300lm |
| 70,000h L80/B50 at max ambient temperature |
| 8 years when used 24/7 at max temperature |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz |
| Dimming function based on DALI protocol Switch-off warning function (for sensor/timer) Built-in motion sensor |
| EN 60598-1 CE marking |
| 0,72m to 1,28m |
| 3,000K, 3,000Â K and 5,000Â K |
| 106 to 121Â lm/W |
| N/A |
| Display more |
| Cugnot Xtrem  Cugnot Xtrem |
| -20 °C to +50°C |
| 1,850Â lm to 11100Â lm |
| 70,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature |
| Diameters: 100 mm and 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz |
| Electronic gear unit for DALI dimming |
| EN 60598-1 CE marking |
| 7Â m and 1 85Â m |
| 3,000K, 3,000Â K and 5,000Â K |
| 109 to 129Â lm/W |
| N/A |
| Display more |
| Niepce FV Niepce FV |
| -20 °C to +35°C |
| 1700 to 4300lm |
| 70,000h L80/B50 at max ambient temperature |
| 8 years when used 24/7 at max temperature |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz |
| Dimming function based on DALI protocol Switch-off warning function (for sensor/timer) Built-in motion sensor |
| EN 60598-1 CE marking |
| 0,72m to 1,28m |
| 3,000K, 3,000Â K and 5,000Â K |
| 106 to 121Â lm/W |
| N/A |
| Display more |
| Crookes  Crookes |
| -20 °C to +35°C |
| 1,850Â to 9,250Â lm |
| 70,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature |
| Diameter: 100Â mm and 133Â mm Borosilicate glass diffuser (nonflammable) 304Â L or 316Â L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK07 |
| 220-240Â V 0/50/60 Hz |
| Electronic gear unit for DALI dimming |
| EN 60598-1 CE marking |
| 7Â m and 1 6Â m |
| 3,000K, 3,000Â K and 5,000Â K |
| 123 to 136Â lm/W |
| N/A |
| Display more |
| Napier Xtrem  Napier Xtrem |
| -20 °C to +50°C |
| 1,850Â to 9,250Â lm |
| 70,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature |
| Diameter: 100Â mm and 133Â mm Borosilicate glass diffuser (nonflammable) 304Â L or 316Â L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK07 |
| 220-240Â V 0/50/60 Hz |
| Electronic gear unit for DALI dimming |
| EN 60598-1 CE marking |
| 7Â m and 1 6Â m |
| 3,000K, 3,000Â K and 5,000Â K |
| 116 to 138Â lm/W |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Resistance to overvoltage and surges |
| Foucault 24V DC  Foucault 24V DC |
| -20 °C to +40°C |
| 400 to 1600lm |
| 50,000h L80/B10 at max ambient temperature |
| 5 years when used 24/7 at max temperature |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 24Â V DC |
| N/A |
| EN 60598-1 CE marking |
| 0,43m to 1,28m |
| 3,000Â K and 4,000Â K |
| 109 to 160Â lm/W |
| N/A |
| Display more |
| Foucault Foucault |
| -20 °C to +40°C |
| 800 to 4800lm |
| 70,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Switch-off warning function (for sensor/timer) Built-in motion sensor |
| EN 60598-1 CE marking |
| 0,43m to 1,84m |
| 3,000Â K and 4,000Â K |
| 80 to 129Â lm/W |
| N/A |
| Display more |
| Pascal  Pascal |
| -20°C to +35°C (excluding battery-operated versions) |
| 1,850Â lm to 11100Â lm |
| 70,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature (excluding batteries) |
| Diameters: 100 mm and 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz (excluding battery-operated versions) |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Built-in motion sensor Built-in 3h emergency unit – Long-lasting LiFe PO4 battery |
| EN 60598-1 EN 60598-2-22 (battery-operated versions) CE marking |
| 7Â m and 1 85Â m |
| 3,000K, 3,000Â K and 5,000Â K |
| 109 to 123Â lm/W (excluding battery-operated versions) |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Resistance to overvoltage and surges |
| Joule X-Heat  Joule X-Heat |
| -20°C to +85°C |
| 1,850Â lm to 4,625Â lm |
| 50,000h L80/B50 at max ambient temperature |
| 5 years when used 24/7 at max temperature |
| Diameter: 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Silicone seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 7Â m and 1 6Â m |
| 4,000Â K |
| 115 to 126Â lm/W |
| N/A |
| Display more |
| Pauli HT200 X-Heat  Pauli HT200 X-Heat |
| -20 °C to +200°C |
| Function of the lamp used |
| N/A |
| 5 years when used 24/7 at max temperature |
| Diameter: 133Â mm Borosilicate glass diffuser (nonflammable) 304Â L or 316Â L stainless steel Silicone seals |
| IP66, IP68, IP69K & IK07 |
| 230V 50Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,46m to 0,68m |
| Function of the lamp used |
| N/A |
| N/A |
| Display more |
| Rankine X-Heat  Rankine X-Heat |
| -20 °C to +70°C |
| 1650 to 2475 lm |
| 50,000h L80/B50 at max ambient temperature |
| 5 years when used 24/7 at max temperature |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,68m to 0,96m |
| 3,000K, 3,000Â K and 5,000Â K |
| 127 to 130Â lm/W |
| N/A |
| Display more |
| Leslie X-Heat  Leslie X-Heat |
| -20°C to +105°C |
| 1,850Â lm to 4,625Â lm |
| 50,000h L80/B50 at max ambient temperature |
| 5 years when used 24/7 at max temperature |
| Diameter: 133Â mm Borosilicate glass diffuser (nonflammable) 304Â L or 316Â L stainless steel Silicone seals |
| IP66, IP68, IP69K & IK07 (glass) IP66, IP68, IP69K & IK05 (sandblasted glass) |
| 220-240Â V 0/50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 7Â m and 1 6Â m |
| 3,000K, 3,000Â K and 5,000Â K |
| 105 to 133lm/W |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Resistance to overvoltage and surges |
| Sabatier Xtrem  Sabatier Xtrem |
| -20 °C to +50°C |
| 2000 to 7700lm |
| 50,000h L80/B10 at max ambient temperature |
| 5 years when used 24/7 at max temperature |
| Diameter: 133 mm Borosilicate glass diffuser (nonflammable) Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 IP66, IP68, IP69K & IK07 (glass) |
| 220-240Â V 0/50/60 Hz |
| N/A |
| ATEX/IECEx: IEC 60079-0, IEC 60079-7, IEC 60079-18, IEC 60079-31 Markings: II 2G Ex eb mb IIC T4 Gb – II 2D Ex tb IIIC T65°C Db IP66/IP68 |
| 0,75 to 1,6m |
| 4,000Â K |
| 95 to 124lm/W |
| N/A |
| Display more |
| Alder  Alder |
| -20 °C to +35°C |
| 2000 to 7700lm |
| 50,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature |
| Diameter: 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz |
| N/A |
| ATEX/IECEx: IEC 60079-0, IEC 60079-7, IEC 60079-18, IEC 60079-31 Markings: II 2G Ex eb mb IIC T4 Gb – II 2D Ex tb IIIC T65°C Db IP66/IP68 |
| 0,75 to 1,6m |
| 4,000Â K |
| 95 to 124lm/W |
| N/A |
| Display more |
| Fumat  Fumat |
| -20 °C to +50°C |
| 11,100Â lm |
| 70,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature |
| Diameter: 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz |
| Electronic gear unit for DALI dimming |
| ATEX/IECEx: IEC 60079-0, IEC 60079-15, IEC 60079-31 Markings: II 3G Ex ec IIC T4 Gc – II 2D Ex tb IIIC T70°C Db IP66/IP68 |
| 85 m |
| 3,000Â K and 4,000Â K |
| 148Â lm/W |
| N/A |
| Display more |
| Jamin  Jamin |
| -20°C to +35°C (excluding battery-operated versions) |
| 1,850Â to 9,250Â lm |
| 70,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature (excluding batteries) |
| Diameters: 100 mm and 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz (excluding battery-operated versions) |
| Dimming function based on DALI protocol Built-in 1h emergency unit – Long-lasting LiFe PO4 battery |
| ATEX/IECEx: IEC 60079-0, IEC 60079-15, IEC 60079-31 Markings: II 3G Ex ec IIC T4 Gc – II 2D Ex tb IIIC T70°C Db IP66/IP68 |
| 7Â m and 1 6Â m |
| 3,000Â K and 4,000Â K |
| 116 to 136Â lm/W (excluding battery-operated versions) |
| N/A |
| Display more |
| Boyle Xtrem  Boyle Xtrem |
| -20 °C to +50°C |
| 1,850Â to 9,250Â lm |
| 70,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature (excluding batteries) |
| Diameters: 100 mm and 133 mm Borosilicate glass diffuser (nonflammable) Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 IP66, IP68, IP69K & IK07 (glass) |
| 220-240Â V 0/50/60 Hz (excluding battery-operated versions) |
| Dimming function based on DALI protocol Built-in 1h emergency unit – Long-lasting LiFe PO4 battery |
| ATEX/IECEx: IEC 60079-0, IEC 60079-15, IEC 60079-31 Markings: II 3G Ex ec IIC T4 Gc – II 2D Ex tb IIIC T70°C Db IP66/IP68 |
| 7Â m and 1 6Â m |
| 3,000Â K and 4,000Â K |
| 116 to 136Â lm/W (excluding battery-operated versions) |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Resistance to overvoltage and surges |
| Sill 48 Xtrem  Sill 48 Xtrem |
| -40°C to +50°C (except 28W : -25°C to +50°C and 160W : -40°C to +45°C) |
| 1170 to 20440lm |
| 100,000h L80/B10 at max ambient temperature |
| 5 years when used 24/7 at max temperature |
| Tempered safety glass or translucent pc-cover, thickness 4mm, UV coated High pressure die cast aluminium one piece housing (AlSi12, with low copper rate) Special pretreatment for increased and long-lasting corrosion protection in chlorinated and saline environments |
| IP65 - IK08 (48M), IK09 (48S and 48L) |
| 220-240Â V 0/50/60 Hz |
| Electronic gear unit for DALI dimming |
| DIN VDE 0711 - EN 60598 CE marking |
| N/A |
| 4000K, 5700K, 2700K, 3000K, amber |
| 63 to 139lm/W |
| N/A |
| Display more |
| Fresnel  Fresnel |
| -20 °C to +50°C |
| 11,100Â lm |
| N/A |
| 8 years when used 24/7 at max temperature |
| Diameters: 100 mm and 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz |
| Electronic gear unit for DALI dimming |
| EN 60598-1 CE marking |
| 85 m |
| 3,000K, 3,000Â K and 5,000Â K |
| 148Â lm/W |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Resistance to overvoltage and surges |
| Coulomb Industry  Coulomb Industry |
| 0°C to +30°C |
| 45 to 330lm |
| N/A |
| 5 years |
| Diameter: 100 mm Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 230V 50Hz |
| Type: permanent mode SATI performance |
| EN 60598-1 EN 60598-2-22 NF C71-820 UTEÂ C71-806 EVAC version: NFÂ C71-800 AMB version: NFÂ C71-801 Markings: CE |
| 0,36m |
| 4,000Â K |
| N/A |
| N/A |
| Display more |
| Maxwell X-Cold  Maxwell X-Cold |
| -60 °C to +25°C |
| 400lm |
| N/A |
| 5 years |
| Diameter: 100 mm Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Silicone seals |
| IP66, IP68, IP69K & IK10 |
| 24Â V DC |
| Type: permanent and temporary |
| EN 60598-1 EN 60598-2-22 NFÂ C71-802 Markings: CE, NF-AEAS |
| 0,38m |
| 4,000Â K |
| N/A |
| N/A |
| Display more |
| Maxwell  Maxwell |
| LSC versions: -20°C to +30°C SXH versions: 0°C to +30°C |
| 45 to 440lm |
| N/A |
| 5 years |
| Diameter: 100 mm Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| LSC EVAC version: 220-240Â VÂ 0/50/60 Hz LSC AMB version: 180-254V 0/50/60 Hz SXH versions: 220-240Â V 50/60 Hz |
| Type: permanent and temporary |
| EN 60598-1 EN 60598-2-22 LSC versions: NFÂ C71-802 Markings: CE |
| 0,36m |
| 4,000Â K |
| N/A |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Resistance to overvoltage and surges |
| Calmette  Calmette |
| -20 °C to +40°C |
| 3600 to 9000lm |
| 70,000h L80/B10 at max ambient temperature |
| 8 years when used 24/7 at max temperature |
| PMMA IK09 protective plate (650°C) Polycarbonate IK10 protective plate (850°C) 304 L stainless steel frame 316 L stainless steel frame |
| Lower surface (clean room side): IP66, IP68 Upper side (maintenance side): IP65 |
| 220-240Â V 0/50/60 Hz |
| Electronic gear unit for DALI dimming |
| EN 60598-1 CE marking |
| 0,68m to 1,58m |
| 3,000K, 3,000Â K and 5,000Â K |
| 112 to 118Â lm/W |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Resistance to overvoltage and surges |
| Celsius X-Cold  Celsius X-Cold |
| -60 °C to +25°C |
| 750 to 2500 lm |
| 50,000h L80/B50 |
| 5 years |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 24Â V DC |
| N/A |
| EN 60598-1 CE marking |
| 0,61m to 1,61m |
| 4,000Â K |
| 40 to 47Â lm/W |
| N/A |
| Display more |
| Bering X-Cold  Bering X-Cold |
| -40 °C to +35°C |
| 1,850Â lm to 11100Â lm |
| 70,000h L80/B10 |
| 8 years when used 24/7 at max temperature |
| Diameters: 100 to 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) 304 L or 316 L stainless steel Silicone seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz |
| Dimming function based on DALI protocol Switch-off warning function (for sensor/timer) Built-in motion sensor |
| EN 60598-1 CE marking |
| 7Â m and 1 85Â m |
| 3,000K, 3,000Â K and 5,000Â K |
| 108 to 138Â lm/W |
| N/A |
| Display more |
| Barents X-Cold  Barents X-Cold |
| -40 °C to +25°C |
| 13700 lm |
| 70,000h L80/B10 |
| 8 years when used 24/7 at max temperature |
| Diameter: 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) 304 L or 316 L stainless steel Silicone seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 0/50/60 Hz |
| Dimming function based on DALI protocol Switch-off warning function (for sensor/timer) Built-in motion sensor |
| EN 60598-1 CE marking |
| 85 m |
| 3,000K, 3,000Â K and 5,000Â K |
| 116 to 119Â lm/W |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| Bendz  Bendz |
| -20 °C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 27 m |
| Function of the lamp used |
| N/A |
| N/A |
| Display more |
| Bendz Bendz |
| -20 °C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 27 m |
| Function of the lamp used |
| N/A |
| N/A |
| Display more |
| Vouet Sensor  Vouet Sensor |
| -25°C to +35°C |
| 800 to 1154 lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Permanent standby mode 10% function |
| EN 60598-1 CE marking |
| 42 m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 100 to 104 lm/W |
| N/A |
| Display more |
| Gounod  Gounod |
| -20 °C to +35°C |
| 2700 to 4500 lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Switch-off warning function (for sensor/timer) |
| EN 60598-1 CE marking |
| 1Â m to 1 6Â m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 61 to 96 lm/W |
| Reflector with reversible louvre |
| Display more |
| Mondrian  Mondrian |
| -20 °C to +30°C |
| 350 to 2000lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 40 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Permanent standby mode 10% function Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 0,63m to 1,27m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 47 to 111lm/W |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| Elgar Push  Elgar Push |
| -20 °C to +35°C |
| 275 to 550lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) 304 L or 316 L stainless steel |
| IP65 & IK10 |
| 220-240Â V 50/60 Hz |
| Built-in dimming button |
| EN 60598-1 CE marking |
| 0,43m to 0,7m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 55 to 69lm/W |
| Reflector with reversible louvre |
| Display more |
| Rimbaud  Rimbaud |
| -20 °C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Diameter: 133Â mm Borosilicate glass diffuser (nonflammable) 304Â L or 316Â L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK07 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,69m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| Musset  Musset |
| -20 °C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Diameter: 100Â mm Borosilicate glass diffuser (nonflammable) 304Â L or 316Â L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK07 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,52m |
| Function of the lamp used |
| Function of the lamp used |
| Flux-breaker grid |
| Display more |
| Werefkin  Werefkin |
| -25°C to +35°C |
| 3450 to 7500 lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Switch-off warning function (for sensor/timer) |
| EN 60598-1 CE marking |
| 1Â m to 1 6Â m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 96 to 106 lm/W |
| N/A |
| Display more |
| Pissarro  Pissarro |
| -20 °C to +35°C |
| 2100 to 3500 lm |
| 70,000h/L80/B10 at 25°C |
| 8 years |
| Diameter: 100 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 02 m to 1 62 m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 65 to 97 lm/W |
| Reflector with slatted louvre |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| GĂ©ricault  GĂ©ricault |
| -25°C to +35°C |
| 800 to 12500 lm |
| 70,000h/L80/B10 at 25°C |
| 5 years |
| Diameters: 100 mm and 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Built-in motion sensor |
| EN 60598-1 CE marking |
| 39 m to 1 85 m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 89 to 136 lm/W |
| N/A |
| Display more |
| Benson  Benson |
| -25°C to +35°C |
| 1600 to 8000 lm |
| 70,000h/L80/B10 at 25°C |
| 5 years |
| Diameters: 100 mm and 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Bluetooth Casambi control system Built-in motion sensor |
| EN 60598-1 CE marking |
| 71 m to 1 62 m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 94 to 123 lm/W |
| High-gloss aluminium extensive reflector |
| Display more |
| Brueghel Direct / Indirect  Brueghel Direct / Indirect |
| -20 °C to +35°C |
| 2,100/1,100 to 4,000/2,000Â lm |
| 50,000h L80/B10 at max ambient temperature |
| 5 years |
| Diameters: 100 mm and 133 mm Borosilicate glass diffuser (nonflammable) Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 IP66, IP68, IP69K & IK07 (glass) |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 1Â m to 1 6Â m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| N/A |
| Low-glare louvre with reflector and louvres in high-performance aluminium |
| Display more |
| Turner  Turner |
| -25°C to +35°C |
| 750 to 4,200Â lm |
| 70,000h/L80/B10 at 25°C |
| 8 years |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Built-in motion sensor |
| EN 60598-1 CE marking |
| 58Â m to 1 84Â m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 5 to 135 5lm/W |
| N/A |
| Display more |
| Brueghel  Brueghel |
| -20 °C to +35°C |
| 2100 to 4000 lm |
| 70,000h/L80/B10 at 25°C |
| 8 years |
| Diameters: 100 mm and 133 mm Borosilicate glass diffuser (nonflammable) Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 IP66, IP68, IP69K & IK07 (glass) |
| 220-240Â V 50/60 Hz |
| Switch-off warning function (for sensor/timer) |
| EN 60598-1 CE marking |
| 1Â m to 1 6Â m |
| 2700K, 3000K, 4000K, 2700-6500K |
| 91 to 128 lm/W |
| Low-glare louvre with reflector and louvres in high-performance aluminium |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| Scorel  Scorel |
| -20 °C to +35°C |
| 1000 to 2500 lm |
| 70,000h/L80/B10 at 25°C |
| 8 years |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Bluetooth Casambi control system Built-in motion sensor |
| EN 60598-1 CE marking |
| 72 m to 1 56 m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 91 to 119 lm/W |
| High-gloss aluminium extensive reflector |
| Display more |
| Purcell  Purcell |
| -25°C to +35°C |
| 1500 to 2500 lm |
| 70,000h/L80/B10 at 25°C |
| 8 years |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 1Â m to 1 6Â m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 77 to 119 lm/W |
| Reflector with slatted louvre |
| Display more |
| Elgar  Elgar |
| -20 °C to +35°C |
| 700 to 1400 lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 70 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 7 m to 1 3 m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 37 to 58 lm/W |
| Reflector with reversible louvre |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| G25 Suspension  G25 Suspension |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Reflector  : Steel sheet Deflector : Perforated steel sheet Structure : Metal Arm : Satin-varnished brass |
| IP20 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,85m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| G1 Suspension  G1 Suspension |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Lampshade : Aluminium Lampshade : Aluminium Structure : Metal Arm : Satin-varnished brass |
| IP20 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 1m |
| Function of the lamp used |
| Function of the lamp used |
| Slats |
| Display more |
| G25 Wall  G25 Wall |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Reflector  : Steel sheet Deflector : Perforated steel sheet Structure : Metal Arm : Satin-varnished brass |
| IP20 |
| 220-240Â V 50/60 Hz |
| Cable-mounted dimmer switch |
| EN 60598-1 CE marking |
| 0,83m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| G1 Wall  G1 Wall |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Lampshade : Aluminium Lampshade : Aluminium Structure : Metal Arm : Satin-varnished brass |
| IP20 |
| 220-240Â V 50/60 Hz |
| Cable-mounted dimmer switch |
| EN 60598-1 CE marking |
| 1,02m |
| Function of the lamp used |
| Function of the lamp used |
| Slats |
| Display more |
| M3  M3 |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Lampshade : Steel sheet Body : Bent steel |
| IP20 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,34m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| G50  G50 |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Body : Perforated metal Cover : Diffusing PMMA Feet : Satin-varnished brass |
| IP20 |
| 220-240Â V 50/60 Hz |
| Cable-mounted dimmer switch |
| EN 60598-1 CE marking |
| 0,18m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| G24  G24 |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Reflector  : Steel sheet Lampshade : Aluminium Base : Satin-varnished brass |
| IP20 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 42 m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| G60 & G61  G60 & G61 |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| G60 Side panels : Steel sheet Cover : Diffusing PMMA Feet : Satin-varnished brass G61 Side panels : Diffusing PMMA Cover : Perforated steel sheet Feet : Satin-varnished brass |
| IP20 |
| 220-240Â V 50/60 Hz |
| Cable-mounted dimmer switch |
| EN 60598-1 CE marking |
| 0,2m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| G30  G30 |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Reflector  : Steel sheet Deflector : Perforated steel sheet Mast : Satin-varnished brass Base : Metal |
| IP20 |
| 220-240Â V 50/60 Hz |
| Cable-mounted dimmer switch |
| EN 60598-1 CE marking |
| 1,53m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| G21  G21 |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Lampshade : Aluminium Mast : Satin-varnished brass Base : Metal |
| IP20 |
| 220-240Â V 50/60 Hz |
| Cable-mounted dimmer switch |
| EN 60598-1 CE marking |
| 1,63m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| G3 & G3T  G3 & G3T |
| -5°C to +30°C |
| G3 : 1250lm, G3 Triple : 3750lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Deflector : Perforated steel sheet |
| IP20 |
| 220-240Â V 50/60 Hz |
| Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 0,2m |
| 2700K |
| G3 : 166lm/W - G3T : 134lm/W |
| N/A |
| Display more |
| G13A  G13A |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Fresnel lens : Pressed glass Body : Perforated metal Structure : Metal |
| IP20 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,65m |
| Function of the lamp used |
| Function of the lamp used |
| Fresnel lens |
| Display more |
| G13  G13 |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Fresnel lens : Pressed glass Body : Perforated metal |
| IP20 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,15m |
| Function of the lamp used |
| Function of the lamp used |
| Fresnel lens |
| Display more |
| G1 Floor  G1 Floor |
| -5°C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Lampshade : Aluminium Lampshade : Aluminium Structure : Metal Arm : Satin-varnished brass Base : Metal |
| IP20 |
| 220-240Â V 50/60 Hz |
| Cable-mounted dimmer switch |
| EN 60598-1 CE marking |
| 1,55m to 2,10m |
| Function of the lamp used |
| Function of the lamp used |
| Slats |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| MOD on Track  MOD on Track |
| -5 °C to +35°C |
| 900 to 2000Â lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Aluminium with colour anodising Nickel-plated copper circular bar Tempered glass 850°C |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| N/A |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 65 to 75lm/W |
| Spotlight beam: 20° Medium Beam: 30° Wide beam: 50° |
| Display more |
| AIRMOD Trio  AIRMOD Trio |
| -5 °C to +35°C |
| 3x900 to 3x2000 lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Aluminium with colour anodising Nickel-plated copper circular bar Tempered glass 850°C |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| N/A |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 65 to 75lm/W |
| Spotlight beam: 20° Medium Beam: 30° Wide beam: 50° |
| Display more |
| AIRMOD Duo  AIRMOD Duo |
| -5 °C to +35°C |
| 2x900 to 2x2000 lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Aluminium with colour anodising Nickel-plated copper circular bar Tempered glass 850°C |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| N/A |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 65 to 75lm/W |
| Spotlight beam: 20° Medium Beam: 30° Wide beam: 50° |
| Display more |
| AIRMOD Mono  AIRMOD Mono |
| -5 °C to +35°C |
| 900 to 2000Â lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Aluminium with colour anodising Nickel-plated copper circular bar Tempered glass 850°C |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| N/A |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 65 to 75lm/W |
| Spotlight beam: 20° Medium Beam: 30° Wide beam: 50° |
| Display more |
| AIRMOD Recessed  AIRMOD Recessed |
| -5 °C to +35°C |
| 900 to 2000Â lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Aluminium with colour anodising Nickel-plated copper circular bar Tempered glass 850°C |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| N/A |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 65 to 75lm/W |
| Spotlight beam: 20° Medium Beam: 30° Wide beam: 50° |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| MOD Duo  MOD Duo |
| -5 °C to +35°C |
| 2x900 to 2x2000 lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Aluminium with colour anodising Nickel-plated copper circular bar Tempered glass 850°C |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| N/A |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 65 to 75lm/W |
| Spotlight beam: 20° Medium Beam: 30° Wide beam: 50° |
| Display more |
| MOD Mono  MOD Mono |
| -5 °C to +35°C |
| 900 to 2000Â lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Aluminium with colour anodising Nickel-plated copper circular bar Tempered glass 850°C |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| N/A |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 65 to 75lm/W |
| Spotlight beam: 20° Medium Beam: 30° Wide beam: 50° |
| Display more |
| MOD Recessed  MOD Recessed |
| -5 °C to +35°C |
| 900 to 2000Â lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Aluminium with colour anodising Nickel-plated copper circular bar Tempered glass 850°C |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| N/A |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 65 to 75lm/W |
| Spotlight beam: 20° Medium Beam: 30° Wide beam: 50° |
| Display more |
| Quadratube W4  Quadratube W4 |
| 0°C to +35°C |
| 1010 to 1620lm |
| 70,000h/L80/B10 at 35°C |
| 8 years |
| Borosilicate glass body with a rectangular 86 x 57 mm section Frosted polycarbonate end cap Metal fixing structure |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Permanent standby mode 10% function Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 0,68m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 50 to 81lm/W |
| Louvre with inclined lamina |
| Display more |
| Quadratube W3  Quadratube W3 |
| 0°C to +35°C |
| 820lm |
| 70,000h/L80/B10 at 35°C |
| 8 years |
| Borosilicate glass body with a rectangular 86 x 57 mm section Frosted polycarbonate end cap Metal fixing structure |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Permanent standby mode 10% function Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 0,68m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 41lm/W |
| Flux-breaker grid |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| Quadratube P2  Quadratube P2 |
| 0°C to +35°C |
| 1860 to 4340lm |
| 70,000h/L80/B10 at 35°C |
| 8 years |
| Aluminum end caps & straps Steel gear cover Crystal quality PMMA body with a rectangular 135 x 85 mm section |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Permanent standby mode 10% function Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 1,32 to 1,62m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 46 to 86lm/W |
| Inclined slats louvre, "Couture" perforations |
| Display more |
| Quadratube P1  Quadratube P1 |
| 0°C to +35°C |
| 3500 to 5680lm |
| 70,000h/L80/B10 at 35°C |
| 8 years |
| Aluminum end caps & straps Steel gear cover Crystal quality PMMA body with a rectangular 135 x 85 mm section |
| IP20 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Push-button dimming function Switch-off warning function (for sensor/timer) Permanent standby mode 10% function Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 1,32 to 1,62m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 87 to 114lm/W |
| Extensive reflector and rectangular slots, type "Persienne" |
| Display more |
| Quadratube W2  Quadratube W2 |
| 0°C to +35°C |
| 275 to 340lm |
| N/A |
| 8 years |
| Crystal quality PMMA body with a rectangular 86 x 57 mm section Metal fixing structure and end caps |
| IP20 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,3m |
| 2700K |
| 55 to 68lm/W |
| N/A |
| Display more |
| Quadratube W1  Quadratube W1 |
| 0°C to +35°C |
| 95lm |
| N/A |
| 8 years |
| Crystal quality PMMA body with a rectangular 86 x 57 mm section Metal fixing structure and end caps |
| IP20 |
| 220-240Â V 50/60 Hz |
| N/A |
| EN 60598-1 CE marking |
| 0,3m |
| 2700K |
| 19lm/W |
| Flux-breaker grid |
| Display more |
| Nilak, Qinu & Qanik  Nilak, Qinu & Qanik |
| -20 °C to +30°C |
| 800 to 3200lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Qanik : diameter 70mm Nilak : diameter 100mm Qinu : diameter 133mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Electronic gear unit for DALI dimming |
| EN 60598-1 CE marking |
| 0,40m to 1,22m |
| 2700K |
| 40 to 45lm/W |
| Use of an internal film for a homogeneous light distribution |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| Balke  Balke |
| -20 °C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Housing : Borosilicate glass (nonflammable) End caps and fixing straps : 316 L stainless steel Structure : Aluminium |
| IP66, IP68 & IK07 |
| 220-240Â V 50/60 Hz |
| Built-in dimming button |
| EN 60598-1 CE marking |
| 0,66m |
| Function of the lamp used |
| Function of the lamp used |
| Flux-breaker grid |
| Display more |
| Bodom  Bodom |
| -20 °C to +30°C |
| 700lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Housing : Co-extruded polycarbonate/PMMA (650°C) End caps and fixing straps : 316 L stainless steel Structure : Aluminium |
| IP66, IP68 & IK10 |
| 220-240Â V 50/60 Hz |
| Dim switch on cable |
| EN 60598-1 CE marking |
| 2,05m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 35 to 58lm/W |
| Reflector with reversible louvre |
| Display more |
| Astrup  Astrup |
| -20 °C to +30°C |
| 700lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Housing : Co-extruded polycarbonate/PMMA (650°C) End caps and fixing straps : 316 L stainless steel Structure : Aluminium |
| IP66, IP68 & IK10 |
| 220-240Â V 50/60 Hz |
| Built-in dimming button |
| EN 60598-1 CE marking |
| 0,58m |
| 2700K |
| 54lm/W |
| N/A |
| Display more |
| Monceau & VendĂ´me  Monceau & VendĂ´me |
| -20 °C to +35°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Diameter: 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 1,34m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| Monceau & VendĂ´me Mini  Monceau & VendĂ´me Mini |
| -20 °C to +35°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Diameter: 100 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 0,52m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| Rivoli  Rivoli |
| -20 °C to +30°C |
| 1500lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 100 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Dimming function based on DALI protocol Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 1,32m |
| 2700K |
| 60lm/W |
| N/A |
| Display more |
| Kyhn  Kyhn |
| -20 °C to +30°C |
| 800 to 2000lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Switch-off warning function (for sensor/timer) |
| EN 60598-1 CE marking |
| 0,69 to 1,6m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 36 to 38,5lm/W |
| N/A |
| Display more |
| Belleville, Monceau & VendĂ´me Nano  Belleville, Monceau & VendĂ´me Nano |
| -20 °C to +30°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Diameter: 70Â mm Borosilicate glass diffuser (nonflammable) 304Â L or 316Â L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK07 |
| 220-240Â V 50/60 Hz |
| Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 27 m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| Belleville Mini  Belleville Mini |
| -20 °C to +35°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Diameter: 100 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 0,36m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| Gude  Gude |
| -20 °C to +35°C |
| Function of the lamp used |
| N/A |
| 5 years |
| Diameter: 100 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Bluetooth Casambi control system |
| EN 60598-1 CE marking |
| 0,36m |
| Function of the lamp used |
| Function of the lamp used |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| Belleville  Belleville |
| -20 °C to +30°C |
| 1875 to 5750lm |
| 50,000h/L80/B10 at 25°C |
| 5 years |
| Diameter: 133 mm Co-extruded polycarbonate/PMMA diffuser (650°C) Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| 220-240Â V 50/60 Hz |
| Switch-off warning function (for sensor/timer) |
| EN 60598-1 CE marking |
| 1Â m to 1 6Â m |
| 2,700Â K, 3,000Â K and 4,000Â K |
| 58 Ă 65lm/W |
| N/A |
| Display more |
| Operating temperature |
|---|
| Luminous flux |
| Service life |
| Warranty |
| Materials and diameter |
| Leaktightness & Resistance to IK shocks |
| Power supply (DC) |
| Lighting level management |
| Standards |
| Length |
| Colour temperature |
| Lighting efficiency |
| Optics & visual comfort |
| Coulomb Coulomb |
| BAES and BAEH versions: 0°C to +30°C LSC versions: -20°C to +30°C |
| 15 to 330Â lm |
| N/A |
| 5 years |
| Diameter: 100 mm Polycarbonate diffuser (960°C) 304 L or 316 L stainless steel Peroxide-cured EPDM seals |
| IP66, IP68, IP69K & IK10 |
| BAES and BAEH versions: 230Â VÂ 50Â Hz LSC EVAC version: 220-240Â VÂ 0/50/60 Hz LSC AMB version: 180-254Â VÂ 0/50/60 Hz |
| BAES and BAEH versions: Temporary type LSC versions: Permanent and temporary type |
| EN 60598-1 EN 60598-2-22 BAES and BAEH versions: NF C71-820, UTE C71-806 BAES EVAC and BAES-BAEH versions: NFÂ C71-800 BAES AMB version: NFÂ C71-801 BAEH and BAES-BAEH versions: NFÂ C71-805 BAES-BAEH version: NFÂ C71-803 LSC versions: NFÂ C71-802 NF AEAS |
| 0,36m |
| 4,000Â K |
| N/A |
| N/A |
| Display more |
