Central source or independent emergency lighting, permanent/non-permanent, for industrial environments
The most solid and durable standalone emergency light on the market
Meets NF EN 60598-2-22, NF AEAS/BAES Performance SATI certified emergency lighting
Standalone temporary emergency lighting for industrial environments
As a front-runner in tubular emergency lighting, the Coulomb luminaire has made a name for itself as a standalone emergency light. Its high level of sealing and solidity ensure exceptional durability. NF AEAS certified with a built-in automatic testing system (Evacuation and Ambiance versions), it can be connected to a 12 V remote control.
Chemical and sealing conditions
Corrosive substances, acid vapours
Saline atmosphere, sea spray
Dust and humidity
Washing with a high-pressure jet
Health and safety requirements according to IFS, BRC and HACCP texts
Thermal, mechanical and electrical stresses
Permanent use at temperatures of up to 35°C
Repeated turning on and off
Heavy mechanical impacts
Forget fine dust, high-pressure jets, corrosive substances and the like. Thanks to its 3-seal system and uniform tightening with a central screw, the housing remains firmly sealed, even when the temperature varies significantly. IP68, IP69K, everywhere and well into the future!
Exceptional mechanical strength, thanks to an impact- and vibration-proof single-piece design housing (IK10). The emergency lighting, with its stainless steel end-caps and fixing straps and its homogeneous polycarbonate diffuser without mating surfaces is ideal for food sites, as no parts can be lost or broken.
The COULOMB emergency light is available in Evacuation (EVAC) or Ambiance (AMB) versions and is NF AEAS certified with automatic testing meeting NF C71-820. For reprogramming, start manually, or switch the luminaire to stand-by if the power is deliberately cut. A polarised 12V remote control is available as an accessory.
To avoid the need to select between several models depending on the required direction of evacuation, our EVAC version is supplied with a set of 3 standard-compliant adhesive labels. These labels can be located as required, directly at the site, depending on the layout of the premises. Benefit from total freedom!
Designed and manufactured in France, keeping supply chains short and using durable components and materials, primarily sourced in Europe. Each luminaire is manufactured, assembled and inspected by our teams with full traceability.
Valid even for 24/7 use at the product’s maximum operating temperature, reflecting our unfailing commitment to our customers!
Even after 15 or 20 years’ use, every single part we supply can be easily replaced, with no need to send it back to us. No one else offers a guarantee of lifelong lighting solutions!
|Emergency output (lm)||Type||L (mm)||T (K)||Designation||Code||Watt**||Technical data||Plan||STEP DS||.TXT||Download all||45||EVAC||357||4000||COUL100 BAES EVAC 113LN||18510010||<0,35||Technical data||Plan||STEP DS||.TXT||Download all||330||AMB||357||4000||COUL100 BAES AMB 113LN||18510020||<0,7||Technical data||Plan||STEP DS||.TXT||Download all|
|Nickel-coated brass capacity Ø5-14 mm||113LN|
|Nickel-coated brass capacity Ø5-14 mm||213LN|
|Reinforced fixing straps with HSHC screw||BRV|
|End caps & fixing straps 304L stainless steel||-|
|End caps & fixing straps 316L stainless steel||MR|
|IP68 4-outlet junction box (capacity Ø7-14mm) CP00674|
|2 x 20 cm 304L stainless steel extensions PU44277|
|2 x 5 cm 304L stainless steel extensions PU44278|
|Polarised 12V remote control for BAES emergency lighting units (always check compatibilities between emergency lighting units and remote controls available on the market) PU46646|
|LED engine maintenance||
|End caps and fixing straps||
|Method of construction||
|LCIE licence n°||
|Resistance to IK shocks||
|Label (EVAC versions)||