ø100 & 133 tube light for very low temperature industrial environments
At very low temperatures, over and above other settings, the safety that comes from good lighting is a priority.
Meets the European emergency luminaire standard NF EN 60598-2-22
24 VDC emergency lighting for central temporary or permanent fixtures in extremely cold environments
The X-Cold Maxwell is an emergency light designed to illuminate environments exposed to very low temperatures, down to -60°C. This durably sealed emergency light able to withstand the most extreme thermal shocks and mechanical impacts is NF AEAS certified and designed to be supplied with the secondary 24 VDC network.
Chemical and sealing conditions
Corrosive substances, acid vapours
Dust and humidity
Freezing temperatures, frost
Washing with a high-pressure jet
Health and safety requirements according to IFS, BRC and HACCP texts
Thermal, mechanical and electrical stresses
Permanent use at temperatures of up to -40°C
Repeated turning on and off
Heavy mechanical impacts
This luminaire is designed to meet food safety regulations and helps to ensure compliance with IFS, BRC and HACCP requirements for your site. This luminaire is sealed (IP68, IP69K), including for thermal shocks, thanks to reinforced silicone gaskets, and fitted with a pluggable connector protected against the ingress of humidity, ensuring a rapid, but reliable installation with no risk of losing parts.
The MAXWELL X-Cold is specifically designed as emergency lighting at extremely cold temperatures, integrating a customised electronic LED board to supply the secondary network with 24 VDC. Thanks to components which are specifically designed for use at -60°C, this fixture is not affected by frequent turning on and off or temperature variations.
At very low temperatures, the mechanical strength of a poorly designed luminaire can be seriously degraded. Thanks to its stainless steel end-caps and fixing straps and homogeneous polycarbonate diffuser with no mating surfaces, the housing can withstand impacts (IK10) and vibrations, even at -60°C.
To avoid the need to select between several models depending on the required direction of evacuation, our EVAC version is supplied with a set of 3 standard-compliant adhesive labels. These labels can be located as required, directly at the site, depending on the layout of the premises. Benefit from total freedom!
Designed and manufactured in France, keeping supply chains short and using durable components and materials, primarily sourced in Europe. Each luminaire is manufactured, assembled and inspected by our teams with full traceability.
Valid even for 24/7 use at the product’s maximum operating temperature, reflecting our unfailing commitment to our customers!
Even after 15 or 20 years’ use, every single part we supply can be easily replaced, with no need to send it back to us. No one else offers a guarantee of lifelong lighting solutions!
|Emergency output (lm)||L (mm)||T (K)||Designation||Code||Watt||Technical data||Plan||STEP DS||.TXT||Download all||400||380||4000||MAX100 LSC BT 24DC SA PS2 BRS||18365004||10||Technical data||Plan||STEP DS||.TXT||Download all|
|Nickel-coated brass capacity Ø5-14 mm||113LN|
|Nickel-coated brass capacity Ø5-14 mm||213LN|
|IP68/69K quick-lock plug with threaded ring (capacity: Ø8 to 10 mm)||PS2|
|Reinforced fixing straps||BRS|
|Reinforced fixing straps with HSHC screw||BRV|
|End caps & fixing straps 304L stainless steel||-|
|End caps & fixing straps 316L stainless steel||MR|
|2 x 20 cm 304L stainless steel extensions PU44277|
|2 x 5 cm 304L stainless steel extensions PU44278|
|End caps and fixing straps||
|Method of construction||
|LCIE licence n°||
|Resistance to IK shocks||