Language
  • Hopkins 133 sc
  • Hopkins 133 sc2
  • Hopkins 133 sc3
<Hopkins 133 sc

Hopkins 133 scImpervious emergency power back-up light fitting for difficult explosive environments

TUBULAR

Increased mechanical resistance
Easy to clean
Limited dirt accumulation
360° orientation

IMPERVIOUS (IP68)

Absolute imperviousness
No internal dust accumulation
Maximum light output
Adapted for pressure cleaning

ROBUST

Mechanical assembly insensitive to external mechanical and/or chemical aggression

DURABLE

High resistance to shocks and corrosion
Single piece casing, material and components selected to ensure long-term investment


HOUSING

• Ø133 mm coextruded polycarbonate/PMMA diffuser for outdoor lighting and chemically aggressive environments
• Also available in borosilicate glass for corrosive environments
• End caps 1/2 ring press-formed in 304L stainless steel (316L also available)
• Gaskets moulded in EPDM
• Cable entry with cable gland
• Possibility for a model with 2 cable entries for looping-in (2 cable glands with stopper plug or 1 cable gland and 1 blind plug at the same cap)

GEAR TRAY

• White powder coated steel sheet gear tray
• Electronic gear unit with increased safety with emergency power lighting of 1 or 3 hours
• Gear unit with EOL (end of life) function and automatic built-in test system
• Internal wiring with silicone isolation braided with glass fibre

REFLECTORS

• White powder-coated gear tray acting as a reflector for general diffused lighting
• Range of technical reflectors in mirror finish aluminium sheeting available

INSTALLATION – MAINTENANCE

• Off-load opening in an explosive environment
• Connection to the gear tray via a 4x4mm² detachable and lockable terminal block
• Attachment with 2 bolt-fitted stainless steel straps with variable centre distance and allowing 360° orientation (available as a reinforced model and/or with closure by HSHC screw)
• Maintenance: release the 2 closing screws, remove the end cap and extract the gear tray

PROTECTION AGAINST EXPLOSION

• Protection: increased safety
• Compliant with the ATEX 94/9/EC directive and standards EN 60079-0,EN 60079-1, EN 60079-7,EN 60079-18, EN 60079-31

REPLACEMENT LICHTING

• Autonomy 1h or 3h
• Automatic test system integrated
• With borosilicate glass diffuser compliant with the standart EN 60 598-2-22

ELECTRICAL CLASS

Class 1
LAMP TYPE
2 T8 fluorescent lamps

FIRE RESISTANCE

Coex. polycarbonate/PMMA 650°C
Borosilicate glass non-flammable

PROTECTION

IP66, IP68 and IP69K

SHOCK RESISTANCE

Coex. polycarbonate/PMMA IK10
Borosilicate glass IK07

OPERATING TEMPERATURE

0°C TO 30°C

PROTECTION AGAINST
EXPLOSION

ZONES 1, 2, 21 AND 22
CE 0080
II 2G Ex d e mb IIC T4 Gb
II 2D Ex tb IIIC T65°C Db IP68

Principal references

PowerDesignationDimensionsDownload
1 hour of emergency power - 1 lamp model
1x18WHOP133 S1H 118E G13 POME 113 BRS1410mmTechnical Data [zip]
1x36WHOP133 S1H 136E G13 POME 113 BRS1410mmTechnical Data [zip]
1x58WHOP133 S1H 158E G13 POME 113 BRS1800mmTechnical Data [zip]
3 hours of emergency power - 1 lamp model
1x18WHOP133 S3H 118E G13 POME 113 BRS1410mmTechnical Data [zip]
1x36WHOP133 S3H 136E G13 POME 113 BRS1410mmTechnical Data [zip]
1x58WHOP133 S3H 158E G13 POME 113 BRS1800mmTechnical Data [zip]
1 hour of emergency power - 2 lamp model
2x18WHOP133 S1H 218E G13 POME 113 BRS1410mmTechnical Data [zip]
2x36WHOP133 S1H 236E G13 POME 113 BRS1410mmTechnical Data [zip]
2x58WHOP133 S1H 258E G13 POME 113 BRS1800mmTechnical Data [zip]
3 hours of emergency power - 2 lamp model
2x18WHOP133 S3H 218E G13 POME 113 BRS1410mmTechnical Data [zip]
2x36WHOP133 S3H 236E G13 POME 113 BRS1410mmTechnical Data [zip]
2x58WHOP133 S3H 258E G13 POME 113 BRS1800mmTechnical Data [zip]