Emergency lighting for central or standalone temporary or permanent light sources, in industrial environments

Two versions of the Maxwell emergency light are available as a central source (NF AEAS/LSC) or standalone 1-hour or 3-hour light (Standard IEC 62034), designed for demanding industrial environments. Evacuation and ambient lighting versions are available. Sealed for the duration and consisting of robust materials, this version is compatible with the DALI smart management system.

The Maxwell luminaire can withstand the conditions of industrial environments.

Chemical and sealing conditions

Corrosive substances, acid vapours

Saline atmosphere, sea spray

Dust and humidity

Washing with a high-pressure jet

Health and safety requirements according to IFS, BRC and HACCP texts

Thermal, mechanical and electrical stresses

Permanent use at temperatures of up to 40°C

Repeated turning on and off

Heavy mechanical impacts

Ultimate sealing and durability

Forget fine dust, high-pressure jets, corrosive substances and the like. Thanks to its 3-seal system and uniform tightening with a central screw, the housing remains firmly sealed, even when the temperature varies significantly. IP68, IP69K, everywhere and well into the future!

Unrivalled mechanical solidity for emergency lighting

Exceptional mechanical strength, thanks to an impact- and vibration-proof single-piece design housing (IK10). The emergency lighting, with its stainless steel end-caps and fixing straps and its homogeneous polycarbonate diffuser without mating surfaces is ideal for food sites, as no parts can be lost or broken.

Automatic testing meeting IEC 62034, and DALI versions

The emergency versions of the MAXWELL luminaire meet NF EN 60598-2-22, and regularly run automatic functional and battery life tests, with a bi-colour LED indicator on the power unit end-cap. DALI versions are also available for decentralised lighting management.

EVAC models supplies with 3 standard-compliant adhesive labels

To avoid the need to select between several models depending on the required direction of evacuation, our EVAC version is supplied with a set of 3 standard-compliant adhesive labels. These labels can be located as required, directly at the site, depending on the layout of the premises. Benefit from total freedom!

Ultra-versatile: permanent or temporary, it’s up to you!

Need even more versatility? Our EVAC and AMB emergency lights can switch between temporary and permanent mode as preferred or required. Simply shunt the internal terminal block during installation – and that’s it! Sammode has everything covered, and your needs come first!

Applications of luminaires by the name Maxwell

  • Mine lighting
  • Paper mill lighting
  • Glassworks lighting
  • Steelworks lighting

  • Powerplant lighting
  • Thermal power station lighting
  • Lighting for water treatment plants

  • Maltworks lighting
  • Sugarworks lighting
  • Seafood products

  • Rail maintenance workshop lighting
  • Regional train and metro station lighting
  • Road tunnels: emergency exit lighting
  • Lighting in underground tunnels

Our services

Designed and manufactured in France

Designed and manufactured in France, keeping supply chains short and using durable components and materials, primarily sourced in Europe. Each luminaire is manufactured, assembled and inspected by our teams with full traceability.

5-year warranty, no matter how tough the conditions

Valid even for 24/7 use at the product’s maximum operating temperature, reflecting our unfailing commitment to our customers!

Removable and repairable directly on site

Even after 15 or 20 years’ use, every single part we supply can be easily replaced, with no need to send it back to us. No one else offers a guarantee of lifelong lighting solutions!

230V AC/DC central battery system version

Compliant with NF EN 60598-2-22, NF AEAS approved LSC unit

Emergency output (lm)TypeL (mm)T (K)DesignationCodeWatt/VA Data sheet Plan STEP DS .TXT Download all
75 EVAC 357 4000 MAX100 LSC EVAC SA 113LN BRS 18405014 45018 Data sheet Plan STEP DS .TXT Download all
330 AMB 357 4000 MAX100 LSC AMB SA 113LN BRS 18405015 7,9/16 Data sheet Plan STEP DS .TXT Download all

Non-addressable independent version

Compliant with NF EN 60598-2-22, automatic test according to IEC 62034

Emergency output (lm)Autonomy(h)L (mm)T (K)DesignationCodeWatt** Data sheet Plan STEP DS .TXT Download all
45 1 357 6500 MAX100 S1H 45-865 SA 113LN BRS 18415053 1 Data sheet Plan STEP DS .TXT Download all
45 3 357 6500 MAX100 S3H 45-865 SA 113LN BRS 18415035 1 Data sheet Plan STEP DS .TXT Download all
440 1 385 4000 MAX100 S1H 440-840 SA 113LN BRS 18415051 1,7 Data sheet Plan STEP DS .TXT Download all
440 3 385 4000 MAX100 S3H 440-840 SA 113LN BRS 18415052 2,2 Data sheet Plan STEP DS .TXT Download all

DALI-addressable independant version

Compliant with NF EN 60598-2-22, automatic test according to IEC 62034

Emergency output (lm)Autonomy(h)L (mm)T (K)DesignationCodeWatt** Data sheet Plan STEP DS .TXT Download all
45 1 357 6500 MAX100 S1H 45-865 RD SA 113LN BRS 18415054 1 Data sheet Plan STEP DS .TXT Download all
45 3 357 6500 MAX100 S3H 45-865 RD SA 113LN BRS 18415055 1 Data sheet Plan STEP DS .TXT Download all
440 1 385 4000 MAX100 S1H 440-840 RD SA 113LN BRS 18415056 1,7 Data sheet Plan STEP DS .TXT Download all
440 3 385 4000 MAX100 S3H 440-840 RD SA 113LN BRS 18415057 2,2 Data sheet Plan STEP DS .TXT Download all

Cable entry

1 cable gland

Nickel-coated brass capacity Ø5-14 mm 113LN

2 cable glands including one blind plug

Nickel-coated brass capacity Ø5-14 mm 213LN

Disconnectable plugs

IP68/69K quick-lock plug with threaded ring (capacity: Ø8 to 10 mm) PS3/PS5

Fixing straps

Reinforced fixing straps BRS
Reinforced fixing straps with HSHC screw BRV

Materials

End caps & fixing straps 304L stainless steel -
End caps & fixing straps 316L stainless steel MR
IP68 4-outlet junction box  (capacity Ø7-14mm) CP00674
Kits for APSAD compliance
2 x 20 cm  304L stainless steel extensions PU44277
2 x 5 cm  304L stainless steel extensions PU44278

Technical specifications

Light source
  • High-efficiency removable LED module (3 SDCM)
  • Photobiological hazard : None (RG0)
Optics
  • Optimum light uniformity: LEDs regularly distributed
  • Special satin-finish housing for LED
Control gear
  • SXH AMB Versions : Driver with constant voltage output
  • LSC or EVAC versions : Driver with constant current output
  • Addressable driver (for DALI SXH versions)
Supply voltage
  • LSC EVAC version : 220-240V 0/50/60Hz
  • LSC AMB version : 180-254V 0/50/60Hz
  • SXH versions : 220-240V 50/60Hz
  • SXH versions : NiMH battery
Electrical class
  • Class I
Operating temperature
  • LSC versions : -20°C to +40°C
  • SXH versions : 0°C to +40°C

Connection
  • With nickel-coated brass cable gland for cable Ø 5-14 mm
  • SXH version : to a 6 x 2,5 mm² terminal block
  • LSC version : to a 3 x 2,5 mm² terminal block
Mounting
  • Attachement with 2 bolt-fitted stainless steel straps with variable center distance and 360° orientation
LED engine maintenance
  • Easily removable LED modules
  • Opening by releasing the screw and extracting the diffuser
  • Gear tray fixed on the end cap supporting the cable entry

Housing
  • Polycarbonate
End caps and fixing straps
  • 304L stainless steel
Gaskets
  • Peroxide-cured EPDM
Method of construction
  • Housing in one piece with high mechanical and chemical resistance
  • Long-lasting imperviousness by axial screw fitting

Compliance
  • EN 60598-1, EN 60598-2-22
  • LSC versions : NF C71-802
LCIE licence n°
  • LSC EVAC version : n°13038
  • LSC AMB version : n°13037
Test
  • SXH versions : Automatic tests compliant with IEC 62034
  • LED indication lamp on the end cap supporting the cable entry
Label (EVAC versions)
  • Single sided signage
  • Provided with universal labels (pictogram and right arrow)
Type
  • Maintained and non-maintained
Waterproofness
  • IP66, IP68, IP69K
Resistance to IK shocks
  • IK10
Fire resistance
  • 960°C

Are you looking for advice or assistance?


Arrange an appointment with one of our experts.