LED tubular light ø133 for industrial environments with high ceilings

The Fresnel LED is designed to illuminate large open areas with high ceilings. These lights are corrosion-resistant and easy to clean with no risk of parts going astray as they are fully sealed. These models also withstand high temperatures and voltage surges, guaranteeing a far longer life than a traditional industrial floodlight.

The Fresnel tubular luminaire is designed to withstand the industrial conditions found in areas with high ceilings.

Chemical and sealing conditions

Corrosive substances, acid vapours

Oils & hydrocarbons

UV radiation and bad weather

Dust and extreme grime

All types of humidity

Washing with a high-pressure jet

Health and safety requirements according to IFS, BRC and HACCP texts

Thermal, mechanical and electrical stresses

Permanent use at temperatures of up to 50°C

Extreme variation in temperature

Repeated turning on and off

Mechanical impacts Intense and repetitive vibrations

Voltage surges up to 4 kV, power surges

Light and sturdy

Forget those heavy, unwieldy cast aluminium spotlights: Sammode has come up with a new and more affordable alternative offering nothing but benefits: a powerful, efficient and reliable LED driver in an ultra-light tubular housing suitable for the harshest industrial environments. Who could ask for more?

Power electronics and lighting specifically designed for high ceilings up to 15 m

Optimised lighting in large industrial areas, where heights can reach up to 15 m, requires strong luminance and lights designed for intensive use. How do we manage it? High-performance LED modules combined with an elliptical beam linear lens, providing durable, low-energy lighting right where you need it.

Optimal sealing & safety, even with intensive use at 50°C

Forget fine dust, high-pressure jets, corrosive substances and the like. Thanks to its 3-seal system and uniform tightening with a central screw (the Screw© system), the housing remains firmly sealed, even when the temperature varies significantly. IP68, IP69K, everywhere and well into the future!

Reinforced industrial electronics

Even the very best housing cannot stand up to the potential effects of an at-risk network. With this in mind, Sammode has opted for the most reliable components available, designed to withstand electrical disturbance, voltage surges, extensive temperature variation and vibrations.

Robust materials

External 100% stainless steel parts, combined with a composite diffuser in co-extruded polycarbonate-PMMA, offering exceptional resistance to detergents, acid vapours, IK10 mechanical impacts and UV radiation.

Applications of luminaires by the name Fresnel

  • Aeronautical industry: lighting in assembly workshops
  • Automotive industry: Lighting in production halls
  • Metalworks: General workshop lighting

  • Power plant: general lighting

  • Vehicle hangar lighting
  • Airports: lighting for terminal buildings with high ceilings
  • Intermodal platform and station lighting

Our services

Designed and manufactured in France

Designed and manufactured in France, keeping supply chains short and using durable components and materials, primarily sourced in Europe. Each luminaire is manufactured, assembled and inspected by our teams with full traceability.

8-year warranty, no matter how tough the conditions

Valid even for 24/7 use at the maximum operating temperature for the product. 8-year warranty you will not find anywhere else on the market, reflecting our unfailing commitment to our customers!

100% Removable and repairable on site

Even after 15 or 20 years’ use, every single part we supply can be easily replaced, with no need to send it back to us. No one else offers a guarantee of lifelong lighting solutions!

Disconnectable quick-lock plug version

CRI80, 4000K, elliptical beam, special for high-ceilinged spaces

Flux (lm)L (mm)DesignationCodeWatt Data sheet Plan STEP DS .TXT Download all
11100 1850 FRE133 26H840 POME PS3 BRS 32115035 75 Data sheet Plan STEP DS .TXT Download all

Cable entry

Cable gland

Polyamide capacity Ø5-12mm 113
Polyamide capacity Ø7-14mm 116
Nickel-coated brass capacity Ø5-14 mm 113LN

Disconnectable plugs

IP68/69K quick-lock plug with threaded ring (capacity: Ø8 to 10 mm) PS3

Fixing straps

Reinforced fixing straps BRS
Reinforced fixing straps with HSHC screw BRV

Materials

Polycarbonate housing PO
Coextruded polycarbonate/ PMMA housing with high chemical resistance POME
End caps & fixing straps 304L stainless steel -
End caps & fixing straps 316L stainless steel MR

Color temperature

3000K 830
4000K 840
5000K 850

Lighting management

Electronic gear unit for DALI dimming RD
1m HO7-RNF pre-wired cable 3G1,5²
Stripped free end CAB0080
Wieland® plug IP68/IP69K (capacity : Ø10-14mm) CAB0095
Wieland® plug and Y spliter for loop-in/out CAB0145

Technical specifications

Light source
  • High-efficiency removable LED module (3 SDCM)
  • 70 000 h L80/B10 at max. operating temperature
Heat management
  • Aluminium heat sink
Control gear
  • High reliability constant current output driver, mechanically and thermally reinforced.
  • Resistance to overload: 320 V AC, 48 h
  • Supports voltage spikes < 4 kV
  • Electronic compatible with central source
  • Compatible with neutral TN, TT and IT arrangements with no limitations
Supply voltage
  • 198-264V 0/50/60Hz
Electrical class
  • Class I
Operating temperature
  • -20°C to +50°C
Optics
  • Intensive linear lens (elliptical) for high-ceilinged spaces

Connection
  • With disconnectable plug Ø 8 to 10 mm cable (3 × 1,5 mm²)
Mounting
  • Attachement with 2 bolt-fitted stainless steel straps with variable center distance and 360° orientation
LED engine maintenance
  • Easily removable LED modules and driver
  • Opening by releasing the 2 closing screws, removing the end cap and extracting the gear tray

Housing
  • Special polycarbonate housing protected from UV, solvents, hydrocarbons and cleaning agents by a coextrusion of PMMA
End caps and fixing straps
  • 304L stainless steel
Gaskets
  • Peroxide-cured EPDM
Method of construction
  • Housing in one piece with high mechanical and chemical resistance
  • Long-lasting imperviousness by axial screw fitting

Waterproofness
  • IP66, IP68, IP69K
Resistance to IK shocks
  • IK10
Fire resistance
  • 650°C
Vibration resistance
  • Meets the severe application requirements of standard EN 60598-1 (tested according to IEC 60068-2-6)

ULR=0% FC3=98%

Are you looking for advice or assistance?


Arrange an appointment with one of our experts.